WAGNER EPG S2 Translation Of The Original Operating Manual

53
EPG S2
OPERATING MANUAL
VERSION 09/2017 ORDER NUMBER DOC2317574
13 SPARE PARTS
13.1 HOW CAN SPARE PARTS BE ORDERED?
Incorrect maintenance/repair!
Risk of injury and damage to the device.
Repairs and part replacement may only be carried out by specially
trained sta or a WAGNER service center.
Before all work on the device and in the event of work interruptions:
- Switch o the energy/compressed air supply.
- Ensure that all system components are grounded.
- Secure the device against being switched back on without
authorization.
Observe the operating and service manual for all work.
WARNING
Always supply the following information to ensure delivery of the right spare part:
Order number, designation and quantity
The quantity need not be the same as the number given in the quantity column "Stk" on
the list. This number merely indicates how many of the respective parts are used in each
component.
The following information is also required to ensure smooth processing of your order:
Identi cation in spare parts lists
Explanation of column "K" (labeling) in the following spare parts lists.
– Address for the invoice
– Address for delivery
– Name of the person to be contacted in the event of any queries
– Type of delivery (normal mail, express delivery, air freight, courier, etc.)
= Wearing parts
Note: These parts are not covered by warranty terms
= Not part of standard equipment, available, however, as additional extra.

WAGNER EPG S2 Specifications

General

Brand	WAGNER
Model	EPG S2
Category	Industrial Equipment
Language	English