WAGNER EPG S2 Translation Of The Original Operating Manual

7
EPG S2
OPERATING MANUAL
VERSION 09/2017 ORDER NUMBER DOC2317574
2 CORRECT USE
2.1 DEVICE TYPE
Universal control unit for controlling two electrostatic manual or automatic powder spray guns.
2.2 TYPE OF USE
The EPG S2 control unit is intended for controlling electrostatic manual and automatic
powder spray guns of type A-P (2 mJ) according to DIN EN 50177.
2.3 USE IN AN EXPLOSION HAZARD AREA
The EPG S2 control unit are intended for use with powder spray guns of types A-P up to 2 mJ
in accordance with the prototype test PTB 12 ATEX 5001.
The EPG S2 control unit may be used in the dust explosion zone (zone 22) under the
following conditions:
– Control unit correctly  tted and connections on rear correctly and securely sealed with
associated cover.
– Not used electrical connections are sealed with protective caps.
Incorrect use!
Risk of injury and damage to the device.
Only connect original WAGNER spray guns to the EPG S2 control
unit.
WARNING

WAGNER EPG S2 Specifications

General

Brand	WAGNER
Model	EPG S2
Category	Industrial Equipment
Language	English