WAGNER SPRINT 2 - Safety Checks; Maintenance Procedures; Periodic Checking of the Manual System; Sprint 2 B Version (Box)

Operating manual Manual system SPRINT 2
8 Cleaning and maintenance
Order number 2467031 | Edition 04/2024 45
After maintenance
4 Carry out safety checks in accordance with
chapter Safety checks [845].
8.2.3 Safety checks
8.2.3.1 Grounding check
Every day
4 Before starting work, carry out a visual check to ensure that the system is grounded.
8.2.4 Maintenance procedures
The maintenance intervals should be adapted by the operator depending on the level of use
and if necessary the level of soiling.
If in doubt, we recommend contacting WAGNER's specialist personnel.
Maintenance work Time stamp
Per shift Weekly
Blow out gun and check for sintering x
Check gun settings x
Check gun discharge pressure x
Blow out powder hoses x
Check grounding x
Check compressed air quality x
Check gun voltage x
Check powder hoses for bends and sintering x
8.3 PERIODIC CHECKING OF THE MANUAL SYSTEM
8.3.1 Sprint 2 B version (box)
1. Perform cleaning in accordance with chapter
Interrupting the coating process of Sprint 2 B
(box) [840].
4
1
2
3
5
6
P_06030
2. Press the catches (4) together at the corrugated surfaces and pull the hose connection
part (1) off the injector housing (3) towards the front.
3. Thoroughly blow out all parts with compressed air.