2011980_d•en•2015-12-01 We reserve the right to make technical changes
19
4.4.3 Manual synchronisation
If you wish to make subsequent changes on the WAREMA climatronic con-
trol panel, you will need to then synchronise these changes with the WARE-
MA climatronic WebControl.
To do this, go to the "Configuration" menu and press the "Synchronisation"
button. This loads the current designations from the WAREMA climatronic
control panel and updates the corresponding text in the user interface.
NOTE Synchronisation only ever occurs in one direction: from the WAREMA clima-
tronic control panel to the WAREMA climatronic WebControl.
NOTE Theoretically, it is possible to manually operate the WAREMA climatronic
control panel and the WAREMA climatronic WebControl simultaneously. In
this case, however, the latter of the two actions will have priority.
NOTE If a channel, group or scene is deleted on the WAREMA climatronic control
panel, the WAREMA climatronic WebControl will recognise this after manual
synchronisation and indicate it by displaying an "!" in a red warning triangle
next to the WAREMA logo (in the "Configuration" menu and in the "Operation"
menu). Clicking on the "!" opens a window displaying the deleted items.
These channels should be deleted in the "Configuration" menu so that the
WAREMA climatronic WebControl does not erroneously continue to display
them (since they no longer have any function).
Fig. 17 Info symbol appears at top left
The Info window displays a list and allows you to also delete those objects
from the WAREMA climatronic WebControl which have already been deleted
on the WAREMA climatronic control panel ("Configuration" menu).
Commissioning
To Next Page
Loading...
Need help?
General
