WAREMA climatronic WebControl User Manual

2011980_d•en•2015-12-01
We reserve the right to make technical changes
6
WAREMA climatronic® WebControl
2 Introduction
With the WAREMA climatronic WebControl, you can comfortably operate
your sun shading system from home on your own WLAN network using your
web browser or mobile devices (laptops, smartphones, tablets).
An app is available for Android devices.
Users can operate other smartphone operating systems, such as iOS devic-
es, using browsers.
NOTE Up to three browsers can connect to the WebControl at one time.
2.1 Functions
You can create up to 64 rooms and assign custom names. You can also
copy channels and scenes and save them to selected rooms (maximum of
10 entries per room, i.e. channels, groups or scenes).
The project data is stored directly on the device.
With the WAREMA climatronic control panel, you can edit
 1-64 channels
 1-64 groups
 1-16 scenes
 Control modes and
 absent mode
can be completely switched on or off.
An SD card slot allows you to create a backup copy of the project and up-
load a firmware update (Chapter 7.1.1 on page 25).
2.2 Scope of delivery
Fig. 1 WAREMA climatronic WebControl and included LAN cable for the LAN con-
nection between WAREMA climatronic WebControl and the WLAN router.
2.3 Connection diagram
power supply unit
24V DC 2,5A
climabus
LAN (network)
controlbus
WLAN
230 V/AC
WAREMA climatronic
®
switch actuators
climatronic
WebControl
®
Fig. 2 Connecting WAREMA climatronic WebControl
Introduction

WAREMA climatronic WebControl Specifications

General

Brand	WAREMA
Model	climatronic WebControl
Category	Control Unit
Language	English