2011980_d•en•2015-12-01
We reserve the right to make technical changes
4
WAREMA climatronic® WebControl
1 Safety instructions
We have developed and tested the WAREMA products and this software in
compliance with basic safety requirements.
Residual risks nevertheless remain!
For this reason, please read this manual before commissioning and operat-
ing the controls.
It is very important that you adhere to the safety instructions listed in this
section and the warning information contained in this manual. Failure to
do so will void any warranty claims against the manufacturer.
Keep this manual for future use.
WARNING
The electrical installation must be performed by a certified electrician
in accordance with the electrical installation regulations published
by the Association of German Electrical Engineers (VDE 0100) or the
standards and legal requirements of the country in which the device is
being installed. The electrician must observe the installation instructions
included with the electrical devices.
1.1 Meanings of symbols
and pictographs
The safety information contained in these instructions is marked with warning
symbols.
CAUTION
Reminder to be careful.
Failure to comply may result in property damage.
NOTE The term NOTE designates important information and helpful tips.
The square indicates an instruction or a prompt for action. Perform the de-
scribed step.
The triangle denotes an event or the result of a preceding action.
The black triangle is a bullet point for lists or selections.
1.2 Intended use
WAREMA climatronic WebControl allows you to control different devices,
such as sun shading products, lighting, HVAC equipment and window drives,
using the channels on your existing WAREMA climatronic control system.
Safety
instructions
To Next Page
Loading...
Need help?
General
