2011980_d•en•2015-12-01 We reserve the right to make technical changes
21
The controlbus LED on the WAREMA climatronic WebControl flashes green,
indicating that the information is being sent.
NOTE With external venetian blinds, you also have the option of adjusting the incli-
nation angle of the slats using the left slider.
The procedure here is the same.
Alternatively, you can also operate your product manually. To do so, press
the Up , stop ■or down button.
A brief push of the button (shorter than approx. 0.6seconds) triggers a tilting
impulse for the slats (on products without slats, movement begins immediately).
A longer push of the button (longer than approx. 0.6 seconds) triggers a
movement.
The graphic display does NOT show the actual product position. Therefore,
when you tilt up the inclination angle slightly by pressing the button, the
display on the WAREMA climatronic WebControl jumps all the way to the
top. However, this does not mean that your external venetian blind has been
tilted up completely; it merely indicates the direction of the action.
5.2 Operating scenes
Switch to the "Operation" menu.
On the left, click the room for which you created the scene (Kitchen) and se-
lect the scene on the right (Kitchen scene 1).
Fig. 19 The newly created scene is displayed in the "Operation" menu.
Operation
To Next Page
Loading...
Need help?
General
