Warmup WT01 - Temperature Scale 2;3

PAGE 36
© 2014 OJ Electronics A/S
• MinimumLimitTemp.–usethissettingtomaintainacomforttemperatureontile
floors. Can be set between 5°C and 25°C.
• MaximumLimitTemp.–usethissettingtoprotectwoodenoorsfromexcessive
temperatures. Can be set between 10°C and 40°C.
NOTE: If the maximum limit for floor temperature is set too high, sensitive floor types
may be permanently damaged.
1. Tap the “Menu” button on the home screen. Then tap the “Engineer Settings”
button.
2. Scroll down and tap the “Temp. Scale” button.
3. Confirm that you want to set minimum and maximum operating temperatures for
the thermostat by tapping “√” or cancel with “X”.
4. If “√” is chosen, you can set a Minimum Scale temperature.
5. Use the “Up Arrow” or “Down Arrow” button to change the Minimum Scale
temperature.
6. Confirm the setting with “OK”.
7. You can now set a Maximum Scale temperature.
8. Use the “Up Arrow” or “Down Arrow” button to change the Maximum Scale
temperature.
9. Confirm the setting with “OK”. – If “Room/Floor Limit” has been selected under
“Sensor Application”, proceed to step 10. Otherwise, proceed to step 16.
10. You can now set a Minimum Limit Temp.
11.
Use the “Up Arrow” or “Down Arrow” button to change the Minimum Limit Temp.
12. Confirm the setting with “OK”.
Temperature Scale 2/3