1 QuickSetupandOperaon
1.1 The WatchBot IP camera is a capable and technical piece of hardware. To get you up
and running quickly with your device, please follow this Quick Setup Guide.
For more advanced setup opons and troubleshoong, please consult the AdvancedGuideon
page16andFAQsonpage29ofthisguide.
1.2 Connectcameracomponents
On removing your camera from the box, there are three essenal components you need to
connect together:
• Connect your Wi-Fi Antenna to the rear of the camera
• Connect the camera to a spare port on your network router using the network cable
provided
• Connect the power supply