Once you have been through the above steps, visit the web address listed
under DDNS Hostname on the sticker on the base of your camera (eg.
http://wbot0XXXX.watch-bot.net) and sign in to your WatchBot Interface.
(Use admin/blank password field).
Your WatchBot camera is now working online and can be accessed over
the internet. Test this by visiting the address above on another computer or
mobile device. If unable to reach the camera whilst using your home
network, try from another external network.
Accessingthecameralocallywithoutthe
CameraToolsoware(MacUsers)
The Camera Tool soware which ships with the WatchBot Camera is Windows only, however
the camera itself will work with a Mac and there is sll a way to access it without using the
soware. You will need to know the login to your network router before connuing.
• Visit the address of your router in your web browser. (It may be 192.168.0.1 or
192.168.1.254) and og in with your router username/password (not the camera’s).
If unknown, try admin/password (this is somemes the default)
• Go to the page that lists your connected devices
• The WatchBot camera should show up as IPCAM
• Listed next to it should be the cameras local IP address, beginning 192.168...
• Now type the camera’s local IP address into your browser and you should be asked for
your camera’s login
• Use admin and leave the password blank
• If successful you will be able to Sign In to the camera interface on your local network
using Push Mode (Firefox/Safari/Chrome etc.)
To access the camera online, please now see Secon 2 of this User Guide. If you are sll
experiencing technical issues, please re-visit the Appendix in this manual and check sengs.
To Next Page
Loading...