Making plumbing connections 1-13
Installing the seal-wash solvent supply tubes
2. Install a second tube to the pump B seal-wash pump.
Installing the seal-wash waste tube
Required material
Seal-wash waste tube assembly (part number 430000575)
To install the seal-wash waste tube:
1. Remove the black cap from the end of the tube and install the tube into
the seal-wash outlet port on the right side of the right pump A head.
Caution: To properly drain the waste fluid, ensure that the waste
tube has no crimps or bends. A crimped or bent drain tube may
prevent adequate flow to the waste container.
To Next Page
Loading...
Need help?
General
