The no format report has only two tabs. In the first, “Report” you will have
the general data, graph, map and table with all the samples. You will find all
the screenshots in the “Screenshots” tab.
Note: Generating graphs can take some time, especially in the case of measurements
with a large number of samples.
8.3.5. Control centre screen
If you have access to a Wavecontrol Control Centre for managing MonitEM
and SMP3 devices, you can upload your SMP3 measurements directly to
the Control Centre.
Note: You can only upload one measurement at a time. You will need an Internet
connection to use this feature.
Make sure that you have entered a valid URL, a user name and a password
in the “Settings” menu (see Figure 14).
Figure 14: Settings screen
In the measurements screen (figure 10), first click on the measurement to upload
the data, then click on “Send to Control Centre”.
To Next Page
Loading...
