3. Route Water Inlet Hose: Here are some routing examples that may be helpful:
4. Connect Water Inlet Hose to water supply:
You will either use:
- the Garden Hose Water Inlet Adapter, or
- the Sink Adapter.
GARDEN HOSE ADAPTER SINK ADAPTER
Option 1: Sink Adapter (Recommended)
In the Plumbing Kit you will find the two Sink Adapters, one is 1/4” NPT type TEE connector, the
other is a 1/4” BSPP type. Those Tee connectors are compatible with most under sink fittings
To install:
1.
Turn off the water supply valve.
2. Unscrew the existing sink connector from the water supply.
3. Screw the Sink Adapter into the water supply.
4.
Reinstall the faucet supply into the threaded side of the Sink Adapter.
5. Do NOT cut the end of the Water Inlet Hose to size yet!
36
To Next Page
Loading...