Option 2: Garden Hose Adapter
To install:
1. This Garden Hose Adapter will thread into a garden hose or sink faucet.
2. Install the Garden Hose Adapter. If your tap does not have a garden hose thread, use the
orange adapter.
3. DO NOT cut the end of the Water Inlet Hose to size yet.
4. DO NOT turn on the water supply valve yet!
If this location has separate hot and cold water supply lines, install using the cold supply line.
NEVER use hot water. Hot water will damage WAZER.
If you do not have a faucet that equip with Garden Hose Thread, there is one attachment you
may use in junction with the Garden Hose Adapter. The orange adapter is a faucet clamp and is
equiped with Garden Hose Threads at the bottom side. Refer to the diagrams belows to install the
orange adapter.
This is not a permanent attachment, please update to Option 1 soon.
Setting Up WAZER Pro |
SECTION 4
37
To Next Page
Loading...