General Instructions
2
CFW-11 | 2-9
A
B
J
D
H
K
E
I
I
M
G
A - keypad
B - control rack cover
C - CC11 control board
D - FLASH memory module MMF-03
E - control accessory module (refer to the Section 7.2 ACCESSORIES on page 7-2)
F - Anybus-CC accessory module (refer to the Section 7.2 ACCESSORIES on page 7-2)
G - bottom front cover
H - heatsink fan
I - mounting supports (for through the wall mounting)
J - hoisting eye
K - rear part of the inverter (external part for flange mounting)
L - SRB4 safety stop board
M - Nema1 kit - only frame size E
Inverter with Nema1 kit
(option - only frame size E)
L
C
F
Figure 2.5 - Main components of the CFW-11 - frame sizes D and E
To Next Page
Loading...
