Installation and Connection
3
3-10 | CFW-11
3
654
21
Figure 3.6 - Repositioning the mounting supports - frame size E
3.1.4 Installation of the Inverter Hoisting Eyes - Frame Size E
Two hoisting eyes for the inverter lifting, which are mounted at the inverter sides (rear part), are supplied. By
inverting their position, as shown in Figure 3.7 on page 3-10, two points for hoisting the inverter, which are
very useful during the mechanical installation of the inverter, are obtained.
Figure 3.7 - Installation of the inverter hoisting eyes frame size E
To Next Page
Loading...
