WEG CFW-11 Series - Identification Labels for the Cfw-11

General Instructions
2
CFW-11 | 2-17
2.4 IDENTIFICATION LABELS FOR THE CFW-11
There are two nameplates on the CFW-11: one complete nameplate is affixed to the side of the inverter and
a simplified one is located under the keypad. The nameplate under the keypad allows the identification of the
most important characteristics of the inverter even if they are mounted side-by-side.
Rated output data (voltage, number of phases,
rated currents for operation with ND and HD
overload cycles, over load currents for 1 min
and 3 s, frequency range)
Rated input data (voltage, number of phases,
rated currents for operation with ND and HD
overload cycles, frequency)
Maximum surrounding air temperature
Current specifications for operation with
heavy overload cycle (HD)
Current specifications for operation with
normal overload cycle (ND)
Manufacturing date (48 corresponds
to week and H to year)
CFW-11 model
Serial number
WEG part number
Inverter net weight
(a) Nameplate afxed to the side of the inverter
BRCFW110044T6OYZ
11799018
SERIAL#:
48 H
1013933619
WEG part number
CFW-11 model
Serial number
Manufacturing date
(48 corresponds to
week and H to year)
(b) Nameplate located under the keypad
Figure 2.12 - (a) and (b) - Nameplates
1
2
Nameplate affixed to the side of the
heatsink
Nameplate under the keypad
2
1
Figure 2.13 - Location of the nameplates