WEG CFW-11 Series - Page 28

General Instructions
2
2-18 | CFW-11
Inverter Model Available Option Kits (Can Be Installed in the Product from the Factory)
Refer to Chapter 8 TECHNICAL SPECIFICATIONS on page 8-1, for a list of models for the CFW-11 series and for a complete inverter's technical specification
Refer to Chapter 7 OPTION KITS AND ACCESSORIES on page 7-1, to check option kit availability for each inverter model
Example BR CFW11 0044 T 6 S _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Z
Field description
Market identification (defines the manual language and the factory settings)
WEG CFW-11 frequency inverter series
Rated output current for use with the Normal Duty (ND) cycle
Number of power phases
Power supply voltage
Option kit Enclosure type Keypad (HMI) Braking RFI filter Safety stop 24 Vdc external
power supply for control
Special hardware
Special software
Character that identifies the code end
Available options
2 characters
According Table 8.1 on page 8-2 and Table 8.3 on page 8-4
T = three- phase power supply
5 = 500...600 V
(8)
6 = 500...690 V
(9)
S = standard product O = product with option kit
Blank = standard
(1)
N1 = Nema1
(6)
21 = IP21
(7)
Blank = standard
(2)
IC = no keypad (blind cover)
Blank = standard
(3)
NB = without braking IGBT
(4)
Blank = standard internal RFI filter NF = without RFI filter
(5)
Blank = standard (Safety Stop function is not available) Y = Safety Stop according to EN-954-1 category 3
Blank = standard (not available) W = 24 Vdc external power supply for control
Blank = standard DC= feeding with DC (only valid for frame sizes F and G) H1 = special hardware #1
Blank = standard E.g.: S1 = special software #1
HOW TO CODIFY THE CFW-11 MODEL (CODIFICATION)
(1) Standard for frame sizes B and C: IP21. Standard for frame size D: IP20/NEMA1. Standard for frame sizes E, F, G and H: IP20. Standard for frame sizes F, G and H with special hardware DC: IP00. (2) Standard keypad (HMI-CFW11). (3)Braking transistor (IGBT) is incorporated in all models of frame sizes B, C, D, and E as standard. (4) Only valid for frame sizes D and E. (5) Only valid for frame sizes B, C and D. (6) Only valid for frame sizes B, C, D and E. (7) Only valid for frame sizes D, E, F and G. (8) Only valid for frame sizes B and C. (9) Only valid for frame sizes D, E, F, G and H.