WEG CFW08 Vector inverter User Manual

25
GENERAL INFORMATION
2.4 CFW-08 IDENTIFICATION
Figure 2.4 - Description and location of the nameplates
Software
Version
Hardware
Revision
Rated Input Data
(Voltage, Number of
Phases Current,
Frequency)
Manufacturing DateWEG Part NumberSerial Number
CFW-08 Model
Rated Output Data
(Voltage, Frequency)
Lateral Nameplate of the CFW-08
Frontal Nameplate of the CFW-08 (under the keypad)
Note: To remove the
keypad, see instructions
in 8.1.1 (Figure 8.2).
WEG Part Number
Seriel Number
CFW-08-Model
Manufacturing Date
Hardware Revision
Software Version

WEG CFW08 Vector inverter Specifications

General

Frequency Range	0 to 300 Hz
Overload Capacity	150% for 60 seconds
Protection Degree	IP20
Communication	RS485, Modbus RTU
Voltage	200 V to 240 V
Control Mode	Vector Control
Ambient Temperature	-10°C to 50°C
Input Frequency	50 Hz / 60 Hz
Output Voltage	0 to input voltage
Braking	Dynamic braking resistor (optional)
Protection Features	Overcurrent, overvoltage, undervoltage, overtemperature
Operating Temperature	-10°C to 50°C
Cooling Method	Forced air cooling (fan)
Humidity	5% to 90% non-condensing