WEG CFW100 - Page 136

13
SOFTPLC
P947 - SoftPLC Parameter 38
P948 - SoftPLC Parameter 39
P949 - SoftPLC Parameter 40
P950 - SoftPLC Parameter 41
P951 - SoftPLC Parameter 42
P952 - SoftPLC Parameter 43
P953 - SoftPLC Parameter 44
P954 - SoftPLC Parameter 45
P955 - SoftPLC Parameter 46
P956 - SoftPLC Parameter 47
P957 - SoftPLC Parameter 48
P958 - SoftPLC Parameter 49
P959 - SoftPLC Parameter 50
Range: -9999 to 9999
Description:
These are parameters whose use is defined by the SoftPLC function.
✓
NOTE!
Parameters P910 to P959 can only be viewed when there are application installed.
13-4 | Micro Mini Drives