www.wegener.com 800092-01 Rev. A 23
Unity 552 User’s Manual
Figure 3.11: iPump 562 OSD Advanced Setup
Unit Setup screen
Use following steps to display Unit Setup screen on the OSD menu:
1. Press any push-button on the front-panel to display the Main Menu.
2. Press the down arrow button to select Advanced Setup.
3. Press Enter.
4. Press the down arrow button to select Unit Setup.
5. Press Enter.
6. View the details as shown in the Figure 3.12.
Figure 3.12: iPump 562 OSD Unit Setup
The following options are available for setting the unit for operation:
Decoder Setup
Audio Setup
To Next Page
Loading...
