Wegener iPump 562 - Elapsed Times Screen; Query Network History; Figure 3.26: Ipump 562 OSD Elapsed Times

Operation
34 800092-01 Rev. A www.wegener.com
Elapsed Times screen
Use following steps to display the Elapsed Times screen on the OSD menu:
1. Navigate to the Signal Quality screen. See Signal Quality screen on page 32
OR from a Signal Quality sub-screen, press the left arrow button to go back to the
Signal Quality screen.
2. Press the down arrow button to select Elapsed Times.
3. Press Enter.
4. View the details as shown in Figure 3.26.
Figure 3.26: iPump 562 OSD Elapsed Times
Query Network History
Use following steps to display the Network History screen on the OSD menu:
1. Navigate to the Unit Status screen, see Unit Status screen on page 31.
2. Press the down arrow button to select Network History.
3. Press Enter.
4. View the details as shown in Figure 3.27.