Wegener iPump 562 - Set Printer Options; Table 3.11: Terminal Options; Figure 3.17: Ipump 562 OSD Terminal Setup; Figure 3.18: Ipump 562 OSD Printer Options

Operation
28 800092-01 Rev. A www.wegener.com
Figure 3.17: iPump 562 OSD Terminal Setup
Use the Terminal Setup screen to set and display the terminal options.
Table 3.11: Terminal Options
Set Printer Options
Use following steps to display Printer Setup screen on the OSD menu:
1. Navigate to the Unit Setup screen, see Unit Setup screen on page 23.
2. Press the down arrow button to select Printer Setup.
3. View the details as shown in Figure 3.17.
Figure 3.18: iPump 562 OSD Printer Options
Option Possible values
Console Baud-rate 2400, 9600, 19200, 38400, 57600, 115200