Wegener iPump 562 - Clear Statistics Used for Diagnosis; Figure 3.29: Ipump 562 OSD Version Info; Figure 3.30: Ipump 562 OSD Clear Signal Counters

Operation
36 800092-01 Rev. A www.wegener.com
3. Press Enter.
4. View the details as shown in Figure 3.29.
Figure 3.29: iPump 562 OSD Version Info
Clear Statistics used for diagnosis
Use following steps to display Clear Signal Counters screen on the OSD menu:
1. Navigate to the Unit Status screen, see Unit Status screen on page 31.
2. Press the down arrow button to select Clear Signal Counters.
3. To reset the statistical information for diagnosis, press Enter.
4. View the details as shown in Figure 3.30.
Figure 3.30: iPump 562 OSD Clear Signal Counters