上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
8 / 144
– Update local parameters with installation package parameters：
use application parameters in the installation package:
• Apply local machine parameters: use machine tool parameters
at the local.
• Apply machine parameters in installation package: use
machine tool parameters in the installation package.
• Manually set machine parameters after software is installed:
use initialized machine tool parameters.
Machine parameters include the following:
• Double Y Origin Error (also called Double Y Gantry Initialization),
Detect Double Y Origin
• Origin Capacitance of Z-axis
• Parameters related to calibration
• Screw Error Compensation, Backlash Compensation
• Absolute Encoder Datum Value
The system starts to install driver automatically. See Automatically Install
Driver for details.
8. Select whether to put generated files and executive files separately according to
your need.
9. According to the prompt, click Yes to reboot the computer at once.
If you need to uninstall the software, do the following:
1. Delete NcEditor folder under directory C:\Program Files\Weihong.
2. Delete NcEditor shortcut on the desktop.
To Next Page
Loading...
