上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
102 / 144
5.2.5 Machining Accuracy
Max. Look-ahead Paths
Maximum number of path to calculate distance.
Range: [1, 1000]
Default value: 300
Enable B-spline Interpolation
Used to enable B-spline interpolation to segment that matches B-spline curve
characteristic, so as to improve machining efficiency.
1: Yes
0: No
Default value: 1
Corner Error
The greater the value is, the larger the corner error is.
Range: [0, 0.3]mm
Default value: 0.1
Anti-vibration Ratio
The greater the value is, the lower the mechanical vibration is, and greater value can
smooth the sharper corner.
Range: [0, 10]
Default value: 0
Acceleration Factor
Used to adjust startup acceleration.
The greater the value is, the faster the startup acceleration is.
Range: [0, 0.5]
Default value: 0.1
To Next Page
Loading...
