上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
112 / 144
Laser off Lag Time for Scan Cutting
It can be set larger when some workpiece is left uncut in trace end.
Range: [0, 10]
Default value: 1
The Buffer Count for Scan Cutting
Modify this parameter when cutting trace is dislocated.
Set it larger when laser is turned on early and set it smaller when laser is turned on
late.
Range: [40, 128]
Default value: 95
5.4.7 Edge Finding
Auto Find Edge Before Machining
Whether to automatically find edges before machining.
Default value: No
To Next Page
Loading...
