上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
54 / 144
3.7.2 Compensate Comprehensive Errors
To compensate comprehensive errors, do the following:
1. Click System → Screw Error Compensation. Screw Error Compensation
dialog box pops up:
2. To get the actual measurement data of the machine tool via laser
interferometer, do the following:
1. Select a positioning axis and set parameters in Laser Interferometer
area.
2. Click Generate G Code. The generated location program appears in
Location Program area.
3. Click Run G Code. The system starts to move the machine tool according
to the generated location program and records location data at the
measurement point.
4. Save the data as a RTL or LIN file in the laser interferometer.
To Next Page
Loading...
