上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
68 / 144
– Z Speed
Used to show current running speed of Z-axis.
– Z Position
Used to show current machine coordinate of Z-axis.
– Capacitance
Used to show current capacitance.
The smaller the distance between the cutting head and the workpiece is,
the smaller the value is.
When the cutting head touches metal workpiece, the value turns into
zero.
• Some common used parameters (changeable):
– Follow Height
– Max Speed
– Sensitivity
– Z Up Position
See List of Parameter for details.
You can modify parameters by doing one of the following:
– Click the current value and enter a value in the dialog box.
– Move the cursor to the right of the value and click the arrow to
modify it.
4.1.6 Parameters Setting Area
It is used to show all parameters related to follow-up control. See List of Parameters
for details.
According to different permissions and identities, follow-up parameters can be
divided into operator parameters and manufacturer parameters. The system shows
operator parameters by default.
If you need to check manufacturer parameters, check Manufacturer and enter the
password.
If you need to modify a parameter, double click the value and enter a value.
To Next Page
Loading...
