What to do if my Weinmann VENTIlogic plus displays 'Arrange maintenance'?
If your device displays 'Arrange maintenance', it needs to be checked or serviced by Weinmann or a specialist dealer as soon as possible because the maintenance interval has expired.
What to do if the Weinmann Medical Equipment shows a filter change indicator?
If the filter change indicator appears, clean or change the filter as soon as possible.
Why does the 'Change filter' message appear on my Weinmann VENTIlogic plus?
The 'Change filter' message appears because the filter is dirty. Press the alarm acknowledgement key, and clean or change the filter as soon as possible.
What to do if Weinmann Medical Equipment displays service life ended for internal battery?
If your Weinmann Medical Equipment displays 'Service life ended. Have internal battery replaced', it means the internal battery has reached the end of its service life. Replace the internal battery.
What to do if Weinmann VENTIlogic plus Medical Equipment displays service life ended for replaceable battery?
If your Weinmann Medical Equipment displays 'Service life ended. Have replaceable battery replaced', it means the replaceable battery has reached the end of its service life. Replace the replaceable battery.
What does BT low mean on Weinmann VENTIlogic plus Medical Equipment?
If the Weinmann Medical Equipment displays 'BT low', the settings may be implausible. Have the settings checked by the doctor supervising treatment.
How to fix filter change on Weinmann Medical Equipment?
If the Weinmann Medical Equipment indicates a filter change, it's likely because the filter is dirty. You should press the alarm acknowledgement key and clean or change the filter as soon as possible.
What causes blower failure in Weinmann VENTIlogic plus?
If there is a blower failure in your Weinmann Medical Equipment, have the device repaired, because the blower is no longer working.
Why replaceable battery is hard to push in Weinmann VENTIlogic plus Medical Equipment?
If the replaceable battery is hard to push in or jams in your Weinmann Medical Equipment, it's likely due to dust particles in the guide rails. Clean the guide rails on both the replaceable battery and the lower part of the housing.
What does arrange maintenance mean on Weinmann VENTIlogic plus Medical Equipment?
If your Weinmann Medical Equipment indicates that maintenance is required, the device needs to be checked or serviced by Weinmann or a specialist dealer as soon as possible because the maintenance interval has expired.
Details the applications and patient suitability for VENTIlogic LS and VENTIlogic plus devices.
Explains how the device operates, including pressure delivery, display, and modes.
General safety advice, warnings, and cautions for using the device safely.
Critical safety warnings regarding resistance and potential alarm failures in life-support modes.
Safety guidelines for device operation, environment, and patient interface use.
Lists diseases or conditions where the device should not be used or used with caution.
Instructions for physically setting up the device and making initial connections.
Steps for connecting the patient circuit for valve ventilation modes.
Instructions for connecting the patient circuit for leakage ventilation.
Instructions for connecting bacteria filters to prevent contamination.
Procedures for supplying and monitoring oxygen therapy with the device.
How the device operates and what to do during a power outage.
Overview of the device's controls and their functions.
Steps for starting up the therapy device and its operating states.
Information on internal and replaceable batteries, charging, and status.
How to access and understand the stored alarm history.
How to choose and set pre-configured therapy programs.
Steps to take after therapy, including device shutdown and cleaning.
Detailed steps for cleaning patient circuits used in leakage ventilation.
Instructions for cleaning the exterior of the therapy device safely.
Procedure for cleaning the coarse dust filter and changing the fine filter.
Guidelines for disinfecting device components and accessories.
General method for performing function checks on various device modes.
Procedure to check flow and pressure sensors in leakage ventilation mode.
Step-by-step guide for calibrating the oxygen sensor.
Table of common device faults, their causes, and recommended remedies.
General| Brand | Weinmann |
|---|---|
| Model | VENTIlogic plus |
| Category | Medical Equipment |
| Language | English |
To Next Page