Manual R06-2016112 / 172
ROTARY INDEXING TABLE CONTROLLER EF2...B
OPERATION / DESCRIPTION OF WEISS SOFTWARE | 8.4 Maintenance
8.4.1.2 Request configuration file (controller internal backup file)
By clicking the button " Request configuration file", the current configuration file can be requested as an XML file.
Fig. 63: Request configuration file (controller internal backup file)
This file can either be opened for viewing or saved on a PC.
This file contains all configuration settings that were made.
It can therefore be used as to restore a configuration.
The function "Indexer configuration via file" (chapter 8.3.4.2 „Indexer configuration via file“ on
page 86) can only be carried out if the configuration file of a completely configured rotary indexing table was reque-
sted and stored beforehand.
To Next Page
Loading...
