Westerbeke 20.0 BEDA - Torque Specifications; 20.0 KW BEDA Torque Specs; 25.0 KW BED Torque Specs; 32.0 KW BEDA Torque Specs

COMPONENT
Cylinder head bolts
Cylinder head cover
Connecting rod cap
Main bearing cap
Camshaft thrust plate
Idler Gear
Rocker arm assembly
Timing gear cover
Rear oil seal cap
Oil pan bolts
Oil pump pipe
Fresh water pump bolts
Crankshaft pulley nut
* Injector to head
Injection pipe flare nut
Intake manifold
Exhaust manifold
Back plate
Flywheel
Damper
Timing gear cover
Alternator bracket
Thermostat housing
Thrust plate
Oil pressure sender
Oil pressure switch
Engine mounts
Alternator bracket
Coolant temperature switch
Coolant temperature sender
Glow plug
Camshaft gear
Injection pump gear
TORQUE SPECIFICATIONS
lb-ft (m-Kg)
BEDA20.0 KW BED 25.0 KW
85-89
(11.8 -12.5)
85-89
(11.8 -12.5)
2-3 (0.3-0.45)
2-3 (0.3- 0.45)
59-65 (8.2- 9.0)
59-65
(8.2- 9.0) ,.
80-85 (11.0 -11.7) 80-85 (11.0 -11. 7)
12-17 (1.6- 2.4)
12-17
(1.6- 2.4)
16-23 (2.2-3.2) 16-23 (2.2- 3.2)
80-85 (11.0 -11.7)
80-85
(11.0-11.7)
12-17 (1.6- 2.4)
12-17·
(1.6-2.4)
11.:...15
(1.5- 2.0)
11-15 (1.5- 2.0)
12-17
(1.6- 2.4) 12-17 (1.6- 2.4)
6-9 (0.8 -1.2) 6-9 (0.8-1.2)
9-13 (1.2 -1.8)
9-13 (1.2 -1.8)
253-289 (35'-
40) 253-289
(35-40)
43-51 (6.0-7.0)
12-17 (1.6- 2.4)
18-22 (2.5- 3.0)
18-22 (2.5 -3.0)
12-17 (1.6- 2.4)
12-17 (1.6- 2.4)
20-24
(2.7 -3.3)
20-24 (2.7 -3.3)
24 -35 (3.3 -4.8)
24 -'35 (3.3 -4.8)
112-118
(15.5 -16.3)
112-118
(15.5 - 16.3)
14-20
(1.9-2.7)
14-20
(1.9-2.7)
12-17 (1.6- 2.4)
12-17 (1.6- 2.4)
27-38 (3.8 -5.3)
27-38 (3.8-5.3)
6-8 (0.8 -1.1)
6-8 (0.8 -1.1)
14-19
(1.9 ~2.6) 14-19 (1.9- 2.6)
9-13 (1.2 -1.8)
9-13 (1.2 -1.8)
9-13 (1.2 -1.8)
9-13 (1.2 -1.8)
23-34 (3.2- 4.7)
23-34 (3.2-4.7)
27-38 (3.8-5.3)
27-38 (3.8-5.3)
18-29
(2.5-4.0)
18-29. (2.5-4.0)
18-29
(2.5-4.0) ...
18~29
(2.5-4.0)
7-11 (1.0 -1.5)
7-11 (1.0 -1.5)
46-69 (6.4 -9.5)
46-69 (6.4-9.5)
29-52 (4.0-9.0)
29-52 (4.0-9.0)
* BEDA 20 I<JN Generator uses an injector that is screwed into the head torque 43- 51 lb-ft (6.0- 7.0).
BEDA32.0 KW
(Do Not Torque)
1.4-2.5
(0.2-0.~5)
59-65 (8.2 -9.'0)
72-77
(1 0.0- ,1 0.7)
14-19
(1.9.-2.6)
14-19
(1.9- 2.6)
14-19
(1.9-2.6)
14-19 ~
(1.9 -2.6)
14-19 (1.9- 2.6)
14-19 (1.9 -2.6)
5.8-8 (0.8 -1.1)
9-13 (1.2 -1.8)
253-289
(35-40)
12-17
(1.6- 2.4)
18-22 (2.5- 3.0)
14-19
(1.9 -2.6)
17-20 (2.3-2.7)
28-38 (3.8-5.3)
130-145 (18-20)
16-24
(2.2-M)
14-19
(1.9-2.6)
27-38 (3.8-5.3)
5.8-8.0, (0.8 -1.1)
14-19 (1.9-2.6)
9-13 (1.2 -1.8)
9-13 (1.2 -1.8)
23-34 (3.2 -4.7)
27-38 (3.8 -5.3)
18-29 (2.5-4.0)
18-29 (2.5 -4.0)
NA
NA
29-52
(4.0-9.0)
BED
25 I<JN and 32 KW Generators use injectors that are bolted to the head -torque value is 12 to 17 lb-ft (1.6 - 2.4) per
bolt tightened evenly.
I...,.,.IWESTERBEKE
) Engines & Generators
52