ENGINE
DISASSEMBLY
9.
Remove the gasdenser and the connecting fuel lines from
the
fiont
of
the engine and remove the fuel lift pump.
INSPECT
HOSES
FUEL
UFT
PUMP
&
GASDENSER
10.
Loosen the raw water pump, remove the drive belt and
then remove the raw water pump.
Remove the engines coolant pump. For servicing, refer to
COOLANT
PUMP.
11.
Detach and remove the ignition wires, the distributor, and
the spark plugs.
Refer to
DISTRIBUTOR DISASSEMBLY in this manual.
See ENGINE ADJUSTMENTS for information on ignition
wires and spark plugs.
DISTRIBUTOR
COMPONENTS
IGNITION
WIRES
Engines & Generators
10
To Next Page
Loading...