Whistler WS1040 User Manual

19
Scanner Cloning
If you have access to a compatible scanner that is
already programmed for your area, you can transfer
that scanner's programming using a standard stereo
patch cord (not included), terminated with 1/8” male
stereo plugs at each end.
The WS1040 is compatible with the following scanner
models: PRO-106, PRO-197, PRO-651, PRO-652, GRE
PSR-500, PSR-600, WS1040, and WS1065.
To clone a scanner:
1. Connect the two scanners at their PC/IF ports.
2. Turn on both scanners.
3. On the source scanner, press PGM.
4. Press the GLOB softkey.
5. Use the 4-direction keypad to locate the Clone
Send option.
6. Press SEL to transfer data.
CLONING

Whistler WS1040 Specifications

General

Channels	1800
Display	LCD
Power Source	AA batteries or AC adapter
CTCSS/DCS	Yes
Trunking	Motorola, EDACS, LTR
Close Call RF Capture	Yes
Priority Scan	Yes
Weather Alert	YES
Type	Handheld
Digital Modes	P25 Phase I
Modulation Modes	AM, FM
PC Connectivity	Yes
Frequency Coverage	25-54 MHz, 108-174 MHz, 216-512 MHz, 764-960 MHz, 1240-1300 MHz