Whistler WS1040 User Manual

35
Searching
Your scanner lets you search for frequencies in your
area. When you find a frequency, you can save them
as objects:
• Tune Search – Tune a frequency and begin an
immediate search.
• Limit Search – Search within a defined range.
• Service Search – Optimized for radio services
• Spectrum Sweeper – Rapidly sweeps a frequency
range for nearby strong signals.
To start a tune search:
1. Press TUNE. The most recent TUNE frequency
appears.
2. Press PSE. The scanner begins the search.
To start a limit search:
1. Press the SRCH key repeatedly until the display
indicates Srch Limit.
When a signal is received, the Lmts softkey
changes to FrLO. You can access the Lmts softkey
by pressing FUNC.
2. To change the lower and upper frequency limits,
press the Lmts softkey.
3. Edit the frequencies and press the Save softkey.
S
Srch Limit ZD
AM 26.500000
25.00 1300.00
Lmts Mode Stor
Limit Search
FrLo: 25.000000
FrHi: 1300.000000
Save Exit Dflt
SEARCHING

Whistler WS1040 Specifications

General

Channels	1800
Display	LCD
Power Source	AA batteries or AC adapter
CTCSS/DCS	Yes
Trunking	Motorola, EDACS, LTR
Close Call RF Capture	Yes
Priority Scan	Yes
Weather Alert	YES
Type	Handheld
Digital Modes	P25 Phase I
Modulation Modes	AM, FM
PC Connectivity	Yes
Frequency Coverage	25-54 MHz, 108-174 MHz, 216-512 MHz, 764-960 MHz, 1240-1300 MHz