Whistler WS1040 User Manual

20
NOTE: Working memory and global settings are
transferred but not V-Scanner folders. The target
scanner's working memory will be overwritten. In some
cases, the CCDump output may interfere with cloning.
To turn off CCDump:
1. Press PGM.
2. Press FUNC and then the GLOB softkey.
3. Use the 4-direction keypad to locate the CCDump
option and change the setting.
4. Press the Save softkey.
Manual Programming
Modern radio systems can be complex and
challenging to program. If you choose to program your
scanner manually, refer to the "Manual Programming
Guide" on page 54.
MANUAL PROGRAMMING

Whistler WS1040 Specifications

General

Channels	1800
Display	LCD
Power Source	AA batteries or AC adapter
CTCSS/DCS	Yes
Trunking	Motorola, EDACS, LTR
Close Call RF Capture	Yes
Priority Scan	Yes
Weather Alert	YES
Type	Handheld
Digital Modes	P25 Phase I
Modulation Modes	AM, FM
PC Connectivity	Yes
Frequency Coverage	25-54 MHz, 108-174 MHz, 216-512 MHz, 764-960 MHz, 1240-1300 MHz