46
Configuring
Your WS1040 scanner includes Global Settings that
store radio-wide settings.
Caution: The Special Global Settings menu (PGM +
GLOB) includes parameter settings that, if not set properly,
may adversely affect the performance of your radio. We
recommend caution when changing these settings.
NOTE: Each parameter includes a Dflt softkey that
restores the factory default setting.
Context sensitive help is available for all parameters.
Press FUNC and then SEL to view help. Press SEL
again to exit help.
GLOB Menu Reference
Contrast – Sets LCD contrast.
Owner – Sets Welcome Message text display.
Clone Send – Press SEL to send data to clone.
Alert Mode – Tone, Light, Both, or Off.
Sound Mode – On or Stlth (Silent).
Key Beeps – On or Off.
Light Mode – Norml, Key, Ignre, On, or Stlth.
Light Area – LCD, Keybd, or Both
Light Secs – Backlight duration in seconds (1-99).
Battery – Ni-MH, Alkaline or Ni-Cd.
Lo Batt Alert – Audible battery alert. (0-60 seconds.
0=off.)
Battery Info – Displays battery voltage, DAC value
and remaining charge time.
Charge Time – Battery charge time in hours (0-99
0=off).
CONFIGURING / GLOBAL MENU
To Next Page
Loading...
Need help?
General
