Whistler WS1040 User Manual

55
Conventional Objects (CONV)
A Conventional Channel Object (CONV) is a single
conventional frequency.
To create a new CONV object:
1. Press PGM.
2. Press the NEW softkey.
3. Press the CONV softkey.
4. Configure settings for the object. To restore the
default setting, press the Dflt softkey.
5. To scan the object, you must assign the object to
at least one scan list.
6. Press the Save softkey.
Change
Setting
Scroll
CONV Menu
Scan Lists – Press SEL to assign the object to scan
lists. An asterisk (*) indicates an assigned scan list.
Freq – Enter frequency in MHz.
Tag – The display name for the object.
Sq Mode – Subaudible squelch mode or Project 25
conventional digital modulation.
Search Automatically analyzes signals to determine
squelch mode and code
None Ignore subaudible squelch
CTCSS Tone coded squelch. Squelch Code
required.
DCS Digitally coded squelch. Squelch Code
required.
P25 Project 25. Squelch Code required.
CONVENTIONAL OBJECTS

Whistler WS1040 Specifications

General

Channels	1800
Display	LCD
Power Source	AA batteries or AC adapter
CTCSS/DCS	Yes
Trunking	Motorola, EDACS, LTR
Close Call RF Capture	Yes
Priority Scan	Yes
Weather Alert	YES
Type	Handheld
Digital Modes	P25 Phase I
Modulation Modes	AM, FM
PC Connectivity	Yes
Frequency Coverage	25-54 MHz, 108-174 MHz, 216-512 MHz, 764-960 MHz, 1240-1300 MHz