56
CONV Menu (Cont.)
Squelch Code – Use Search to detect tone or code
value for selected squelch type.
L/Out – Permanent lockout status for the object.
Priority – On or off.
LED Mode – Solid or Flash.
LED Color – 0=Off, 1=Red, 2=Yellow, 3=Green,
4=Cyan, 5=Blue, 6=Magenta, 7=White.
Latch LED – Off, the Alert LED is on only during a
transmission; On, the Alert LED remains lit after a
transmission, unless overridden.
Backlight – On, Off, or Flash.
Alarm – None, Chirp, Hi-Lo, Alert, Ring, 2-Chirp,
Fast Hi-Lo, DTMF#.
Fav – Assigns the object to the Favorites scan list.
Skywarn – Assigns the object to the Skywarn Scan
List.
Modulation – Automatic, AM, FM, or NFM
Atten – Attenuator, applies 20 dB of attenuation to
reduce interference from strong signals.
Delay – On or off.
Delay Time – (1-250) Delay time in 100 ms.
Digital AGC – On or off.
Supertrack – Alternative DSP decoding algorithm.
May help reception on some systems.
AudioBoost – 6 dB audio level boost.
Hit Count – Number of received transmissions for
the object. Global Hit Counts must be set to on.
Press the Dflt softkey to reset to 0.
CONVENTIONAL OBJECTS
To Next Page
Loading...
Need help?
General
