Whistler WS1040 User Manual

57
Trunking System Object (TSYS)
You must create a TSYS object that contains the
system parameters for each trunked radio system.
To create a new TSYS object:
1. Press PGM.
2. Press the NEW softkey.
3. Press the TGRP softkey.
4. Scroll to the TSYS parameter and press SEL.
5. Configure settings for the object. To restore the
default setting, press the Dflt softkey.
6. Press the Save softkey.
Change
Setting
Scroll
TSYS Menu
Type – Defines the system type:
MOT 800/900 Motorola 800 or 900 MHz analog or digital ,
3600 baud control channel
MOT VHF/UHF
P25 MANUAL Use default 800 MHz table data.
P25 AUTO Project 25, table data via control channel
EDACS STD 800 MHz EDACS, 9600 BPS EDACS control
channel.
EDACS
NAROW
900 MHz and some VHF/UHF EDACS, 4800
BPS EDACS control channel
LTR Logic Trunked Radio
Tag – The display name for the object.
Frequency – Control channel frequencies:
Motorola and P25 Any order
EDACS LCN order
LTR Home Repeater order.
TRUNKING SYSTEM OBJECT

Whistler WS1040 Specifications

General

Channels	1800
Display	LCD
Power Source	AA batteries or AC adapter
CTCSS/DCS	Yes
Trunking	Motorola, EDACS, LTR
Close Call RF Capture	Yes
Priority Scan	Yes
Weather Alert	YES
Type	Handheld
Digital Modes	P25 Phase I
Modulation Modes	AM, FM
PC Connectivity	Yes
Frequency Coverage	25-54 MHz, 108-174 MHz, 216-512 MHz, 764-960 MHz, 1240-1300 MHz