Whistler WS1040 User Manual

25
Monitoring
Your scanner can monitor a single frequency or object.
To tune a frequency to monitor:
1. Press TUNE.
2. Press the MODE softkey to change the receive
mode (AM, FM au).
3. Use the number keys to enter a frequency.
4. Press ENT to make this the TUNE frequency. Next
time you press TUNE, this frequency will load.
To monitor an object:
1. Press MAN to enter Manual mode.
2. Use the 4-direction keypad to browse the objects
in the current scan List and select an object to
monitor. Only scan lists that contain objects appear
when browsing.
Finding Stored Objects
The radio searches in the frequency, tag, or ID fields.
When the scanner finds a matching object, you may
press MAN to begin monitoring the object.
To find objects that are locked out:
1. Press PGM.
2. Press the EDIT softkey.
3. Press the FIND softkey.
4. Press the L/Out softkey.
5. Press the NEXT softkey to find the next locked out
object.
Scan
Lists
Objects
MONITORING

Whistler WS1040 Specifications

General

Channels	1800
Display	LCD
Power Source	AA batteries or AC adapter
CTCSS/DCS	Yes
Trunking	Motorola, EDACS, LTR
Close Call RF Capture	Yes
Priority Scan	Yes
Weather Alert	YES
Type	Handheld
Digital Modes	P25 Phase I
Modulation Modes	AM, FM
PC Connectivity	Yes
Frequency Coverage	25-54 MHz, 108-174 MHz, 216-512 MHz, 764-960 MHz, 1240-1300 MHz