Whistler WS1040 User Manual

39
Service Search Object (SRVC)
A Service Search Object (SRVC) is optimized for specific
radio services across multiple frequency bands.
Because a SRVC object is assigned to a scan list, it can
be used to search while the radio is scanning. It can
also be used as a stand-alone search.
To create a new SRVC object:
1. Press PGM.
2. Press the NEW softkey.
3. Press the SRCH softkey.
4. Press the SRVC softkey.
5. Configure settings for the object. To restore the
default setting, press the Dflt softkey.
6. Name your search in the Tag field.
7. To search while scanning, assign the object to a
scan list.
8. Press the Save softkey.
To begin a Service search:
1. Press MAN.
2. Use the 4-direction keypad to navigate to the
SRVC object.
3. Press the SRCH softkey (not the SRCH key on the
keypad).
4. Press PSE to hold on a transmission. To resume,
press PSE again.
• Press the FrL/O softkey lock out a frequency.
• Press the STOR softkey to create a new CONV
object using the found frequency.
Change
Setting
Scroll
SERVICE SEARCH

Whistler WS1040 Specifications

General

Channels	1800
Display	LCD
Power Source	AA batteries or AC adapter
CTCSS/DCS	Yes
Trunking	Motorola, EDACS, LTR
Close Call RF Capture	Yes
Priority Scan	Yes
Weather Alert	YES
Type	Handheld
Digital Modes	P25 Phase I
Modulation Modes	AM, FM
PC Connectivity	Yes
Frequency Coverage	25-54 MHz, 108-174 MHz, 216-512 MHz, 764-960 MHz, 1240-1300 MHz