Whistler WS1040 User Manual

34
Home Repeater AutoMove (LTR)
LTR Home Repeater AutoMove lets you program LTR
trunking systems, even if you don't know the home
repeater. When active, you may enter the LTR system
frequencies in any order, and AutoMove automatically
moves the frequencies to home repeater slots as
transmissions are received.
To enable LTR Home Repeater Automove:
1. Press PGM.
2. Use the 4-direction keypad to navigate to the LTR
TSYS object.
3. Scroll down to the last item in the menu,
AutoMove HRs.
4. Use the four-direction keypad to toggle AutoMove
HRs on or off
5. Press the Save softkey.
HOME REPEATER

Whistler WS1040 Specifications

General

Channels	1800
Display	LCD
Power Source	AA batteries or AC adapter
CTCSS/DCS	Yes
Trunking	Motorola, EDACS, LTR
Close Call RF Capture	Yes
Priority Scan	Yes
Weather Alert	YES
Type	Handheld
Digital Modes	P25 Phase I
Modulation Modes	AM, FM
PC Connectivity	Yes
Frequency Coverage	25-54 MHz, 108-174 MHz, 216-512 MHz, 764-960 MHz, 1240-1300 MHz