Whistler WS1040 User Manual

30
To activate Priority Scan Mode:
While the radio is scanning, press FUNC and then
press PRI. Repeat to cancel Priority Scan Mode.
NOTE: Priority sampling may cause brief muting of
received audio if another object is active.
Favorites Scan List
To add an object to the Favorites Scan List, press
FUNC and then FAV while the object is active.
When you press FAV later, your scanner suspends all
scanning except for the Favorites Scan List.
To clear the entire FAV Scan List:
1. Press PGM.
2. Press the GLOB softkey.
3. Scroll to down to the Clear FAV menu item.
4. Press SEL. You will be asked to confirm the action.
5. Press the Save softkey.
FAVORITES SCAN LIST

Whistler WS1040 Specifications

General

Channels	1800
Display	LCD
Power Source	AA batteries or AC adapter
CTCSS/DCS	Yes
Trunking	Motorola, EDACS, LTR
Close Call RF Capture	Yes
Priority Scan	Yes
Weather Alert	YES
Type	Handheld
Digital Modes	P25 Phase I
Modulation Modes	AM, FM
PC Connectivity	Yes
Frequency Coverage	25-54 MHz, 108-174 MHz, 216-512 MHz, 764-960 MHz, 1240-1300 MHz