Whistler WS1040 User Manual

58
TSYS Menu (Cont.)
L/Out – Permanent lockout status for the object.
Atten – Attenuator, applies 20 dB of attenuation.
Useful in areas with interference from strong signals.
Narrow FM – Used by most 900 MHz analog
systems. Not used by digital systems.
AudioBoost – 6 dB audio level boost.
Dwell – (0-200 x 100 mS) The time in milliseconds
that the scanner dwells on a Motorola, P25, or
EDACS system control channel. Automatic=0, which
uses control channel information.
Digital AGC – Controls Digital AGC function.
Supertrack – Alternative DSP decoding algorithm.
Multi-Site – Used with networked Motorola and P25
trunked radio systems.
OFF Uses the first usable control channel in the
control channel list.
STAT Uses every usable control channel in the con-
trol channel list.
ROAM Uses the control channel with the best decod-
ing quality, lower than Threshold Hi.
Searches for a new control channel when
the current control channel drops below
Threshold Lo.
Threshold Hi
(1-99)
Upper control channel threshold percentage
Threshold Lo
(1-99)
Lower control channel threshold percentage
T Tables – (Default, Splinter, Custom) For Motorola
and P25 systems only.
Fleet Map – For Motorola Type I systems only.
TRUNKING SYSTEM OBJECT

Whistler WS1040 Specifications

General

Channels	1800
Display	LCD
Power Source	AA batteries or AC adapter
CTCSS/DCS	Yes
Trunking	Motorola, EDACS, LTR
Close Call RF Capture	Yes
Priority Scan	Yes
Weather Alert	YES
Type	Handheld
Digital Modes	P25 Phase I
Modulation Modes	AM, FM
PC Connectivity	Yes
Frequency Coverage	25-54 MHz, 108-174 MHz, 216-512 MHz, 764-960 MHz, 1240-1300 MHz