Whistler WS1040 User Manual

28
To enable Scan Lists from Global Settings:
1. Press PGM to enter Program Mode
2. Press the GLOB softkey.
3. Scroll to the Scan Lists parameter and press SEL.
4. Use the 4-direction keypad to toggle the scan list.
An asterisk (*) indicates that the scan list is enabled.
5. Use or to access the Enabled option
6. Use or to enable selected scan list.
7. Press the SAVE softkey.
8. Press SAVE again.
SCAN LISTS FROM GLOBAL SETTINGS

Whistler WS1040 Specifications

General

Channels	1800
Display	LCD
Power Source	AA batteries or AC adapter
CTCSS/DCS	Yes
Trunking	Motorola, EDACS, LTR
Close Call RF Capture	Yes
Priority Scan	Yes
Weather Alert	YES
Type	Handheld
Digital Modes	P25 Phase I
Modulation Modes	AM, FM
PC Connectivity	Yes
Frequency Coverage	25-54 MHz, 108-174 MHz, 216-512 MHz, 764-960 MHz, 1240-1300 MHz