42
SWPR Menu Reference
Scan Lists – Press SEL to assign the object to scan
lists. An asterisk (*) indicates an assigned scan list.
Type – All Bands or Public Safety. Public Safety
activates Sub-bands.
Sub-bands – Press Sel to toggle active Public Safety
sub-bands. An asterisk (*) indicates an active sub-band.
Tag – The display name for the object.
L/Out – Permanent lockout status for the object.
LED Mode – Solid or Flash.
LED Color – 0=Off, 1=Red, 2=Yellow, 3=Green,
4=Cyan, 5=Blue, 6=Magenta, 7=White.
Latch LED – Off, the Alert LED is on only during a
transmission; On, the Alert LED remains lit after a
transmission, unless overridden.
Backlight – On, Off, or Flash.
Alarm – None, Chirp, Hi-Lo, Alert, Ring, 2-Chirp,
Fast Hi-Lo, DTMF#.
Fav – Assigns the object to the Favorites scan list.
Atten – Attenuation. On or Off.
Delay – On or Off.
Delay Time – (1-250) Delay time in 100 ms.
Zeromatic – On or off.
Special – On or Off. Sweeps the RF spectrum in 1
MHz increments. If the sweep finds activity SWPR
sweeps that range to find the source.
Search Dir – Up or Down.
Hit Count – Number of received transmissions for
the object. Global Hit Counts must be set to on.
Press the Dflt softkey to reset to 0.
SPECTRUM SWEEPER
To Next Page
Loading...
Need help?
General
