Rev AB How to Turn ON the Printer 5-5
Wolke m600 touch Operator Manual
5 During SHUTDOWN, the Stop (red) and Run (green) icons (see
Figure 5-5) are disabled (in grey color).
Note: SHUTDOWN means Power is ON to the controller but power is OFF
to the printhead(s).
Note: If the print sensor is activated accidentally, the printer will not operate
as the sensor and encoder input are ignored during the shutdown status.
When production line and printer are ready for start up, perform the
steps mentioned in “How to Start the Printer” on page 5-12.
Figure 5-5: Clarity
®
Home Page
Stop (red)
Run (green)
Startup/Shutdown
Shutdown
Icon
Status
To Next Page
Loading...
