Manual 26815 QuickTrip Electro-Hydraulic Trip Block Assembly
Woodward 61
Revision History
Changes in Revision E—
• Changed Item number references in Table 1-1 and Figure 1-3
• Changed ground lug torque value in the Unit Grounding section in Chapter 3
Changes in Revision D—
• Updated ATEX Directive and added instructions to Regulatory Compliance section
• Added Ex nA nC Minimum Ambient Temperature to Environmental Specifications in Chapter 2
• Added IMPORTANT box to Limitations section in Chapter 6
• Updated EU DoC
Changes in Revision C—
• Replaced Figure 3-2 with a corrected chart
Changes in Revision B—
• Updated specifications in Chapter 1 first paragraph, in Hydraulic Connections section in Chapter 3,
and in the Commissioning Checklist in the Appendix
• Deleted Minimum Supply Pressure from Hydraulic Specifications
• Changed Maximum Trip Header Pressure in Hydraulic Specifications
• Changed content to clarify Oil Flow/Cv Rating in Hydraulic Specifications
• Added Table 2-1
• Removed Figures 2-2 and 2-3
• Added Flow Coefficient and Flow Rate Calculation formulas and variable definitions
• Updated former Figure 2-4 and 2-5 which were redesignated Figures 2-2 and 2-3
Revision A—
• Added new part number
• Reordered and updated Compliance section
• New DOC/DOI
To Next Page
Loading...
Need help?
General
