WTC 200 - Return to the Weighing Mode; 11 Weighing Operation; Good Weighing Practice

13
Press to confirm modification.
Press to exit, function remains unmodified.
Press to move one menu level up.
10.3. Return to the Weighing Mode
Introduced menu modifications are automatically saved to scale memory upon
return to the home screen. To return to the home screen press key
repeatedly.
11. WEIGHING OPERATION
Load the weighing pan. Read the result when stability marker is displayed.
Only stable weighing results can be recorded (stability
marker ).
11.1. Good Weighing Practice
To assure long-term operation and correct mass measurements, follow
the rules presented below:
Load the weighing pan steadily
avoiding mechanical shocks.
Place weighed loads centrally on the
weighing pan (eccentricity errors are
specified by EN 45501 standard, point
3.6.2.).
Do not apply concentrated force (total
load in one point).